| Information: |
Unsaturated polyesters resins, styrene, titanium dioxide, stuffing, anti sediment agent, Cobalt bis (2-ethylhexanoate) auxiliary agent and catalyst mixing ratio 100:2 ~ 3.
Applications:
Good scratching performance, excellent resistance to temperature changing, outstanding adhesive force and elasticity. It has excellent resistance under baking, mainly being applied to the leveling up and decoration of the blemishes, such as the drop pits of keelsons, pin-shaped cavities, crackles, and little welding lines etc. before closing the floating coat in the painting techniques of passenger car to satisfy the leveling and smoothness of the keelsons before painting the surface. It is also of good tooling ability for glass reinforced plastics.
Technical Data Sheet:
|
Item
|
Standard
|
|
Outward appearance
|
White color, no gel, no solid, no machinery impurity.
|
|
Storage at high temperature 80 deg. C., 24h)
|
No nugget or machinery impurity when temperature downs to room temperature.
|
|
Consistency, cm
|
8 to 13
|
|
Gelling time (23-27 deg. C.),min
|
2 to 11
|
|
Air drying, h
|
5 max
|
|
Scratching performance
|
Gentle resistance, not be crispate.
|
|
Putty appearance
|
Flat, smooth, average color, no crackle, a little of bubbling and sand holes are allowed.
|
|
Water finishing (20min to 1h30min)
|
Easy to make slurry, does not adhere to sand paper, flat after polishing.
|
|
Dry finishing (40min to 5h)
|
Easy to make powder, does not adhere to sand paper, flat after polishing.
|
|
Impact Strength, cm
|
40 min
|
|
Pliability
|
100 max
|
|
Adhesive force, grade
|
2 max
|
Reference for construction:
1.ve rust, oil, dirt, old film, water, etc. from surface completely by sander and solvent.
2.andard mixing ratio of Base and Hardener is: Base/Hardener= 100:2 (by weight)
3.ead Base and Hardener thoroughly to make the color of mixture uniform.
4.ter complete mixing, apply the mixture within pot life (7~10 min)
5.t life changes depending on temperature and humidity.
6.ply the mixture rubbing down fully with spatula to avoid bubbling.
7.nding shall be made after complete dying (for mote than 1 hour at 20 deg. C.).
8. high humidity, especially during rainy season, the hardening time becomes longer than usual.
Caution:
1. not return used putty and mixture to the base can.
2.ed tools shall be washed with lacquer thinner.
3.ore free from fire, direct sun-shine, high-temperature and rain drop.
3.orage period: within 6 month after manufacturing.
Precautions:
1.AM HARDENER- IRRITANT. Avoid contact with eyes. In case of contact, flush thoroughly with water, and get prompt medical attention. If taken unintentionally, induce vomiting consult physician.
2.oid prolonged or repeated contact with skin. In case of contact, flush skin with water. Keep away from heat or flame.
3.EP OUT OF THE REACH OF CHILDREN. Seal the can tightly when no in use and keep it at a dark, cool place. |
